How often copper cable recovery machine lubrication ?
2021-08-05
The lubrication effect on the machine and equipment is very good, which can reduce the friction between the equipment and make the small copper cable recovery function work normally. If no new lubricant is added for a long time, the copper cable recovery machine will become dry and the processing speed will be slow. In order to maintain the processing of the copper cable recovery machine, how often should the lubricant be added? Conflicts occur in the process of use and cause machine wear. Long time friction will cause wear of small copper cable recovery machine. Most of the faults of the equipment on the small copper cable recovery machine are caused by wear and tear, and the equipment is repaired regularly. During maintenance, the lubricating oil should be replaced in time, so that the small copper cable recovery machine can maintain a good working environment, and at the same time, the wear and tear of the equipment can be reduced to a great extent, so as to obtain greater economic benefits.
Our machines are usually operated in the open. The lubrication effect is related to the weather and temperature. The viscosity of lubricating oil needs to be adjusted according to seasonal changes. If the temperature is high in summer, thicker lubricating oil can be used to increase the service life of the equipment lubricating oil, and the bearing effect is better. Reduce the consistency of lubricating oil in winter to ensure the effective operation of copper cable recovery machine under low temperature environment. Generally, the lubricating oil replacement cycle is about one and a half months, and the temperature can be replaced once a month when the temperature is high. This ensures that the equipment works exceptionally well. Let's check the time carefully, find the problem in time, and make sure the lubricating oil is consistent with the situation at all times.